Quality Water Treatment SOFTPRO ELITE Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 44

Quality Water Treatment SOFTPRO ELITE Скачать руководство пользователя страница 25

SOFTPRO INSTALLATION GUIDE

©2022 SoftPro Water Systems. All rights reserved.

25

.

4)

Feed the brine line tube from the inside and out through the brine tank. (Later, the brine line tube will connect direct

to the softener control valve.)

B) SOFTENER (MINERAL) TANK ASSEMBLY

NOTE ON DELIVERED PACKAGE OREIENTATIONS:

It is acceptable (and common) for the softener tank to arrive on its side or upside-down. The spill cap will keep the pre-

loaded resin in place. The resin will self-level after one or two regeneration cycles. Check everything for any tank damage.

If you suspect damage, please photo or video the damage and send it to our support team.

1)

If applicable, install the neoprene jacket.

In some cases, the neoprene jacket will come pre-installed.

2)

Remove the spill cap from the top of the softener tank.

FOR SYSTEMS SIZES 24,000 TO 64,000 GRAIN CAPACITIES:

These systems come completely pre-loaded with resin.

Your tank is ready to install the softener control valve.

Go to the next step.

FOR SYSTEMS SIZES LARGER THAN 80,000 AND LARGER GRAINS CAPACITY

LOAD ADDITIONAL RESIN INTO THE SOFTENER TANK

«
...
23
24
25
26
27
...
»

Содержание SOFTPRO ELITE













































Отзывы:

Нет отзывов