12
Customer Helpline
08456 400 800
5a.
Clip the handle
15
into the top half of the grass box
16
5b.
Align the front ends of the top half and the bottom half of the grass collector box. Clip the two halves
together starting at the front.
5c.
Once the front clips on either side are secure, work back on either side to secure each clip . This
method will help to keep the two halves of the box aligned.
5d.
Finally, press the insert
17
into the grass collector
4
as shown in 5d, and make sure the insert is
located securely in position. This insert assists the grass flow into the grass collector when the grass
collector is fitted to the mower.
ATTENTION!
Never operate the mower unless the deflector guard and grass collector are fully installed.
Risk of injury!
Step 2 - Grass Collector Assembly (continued)
Assembly
Extension Lead
8
Before you connect the mower to the mains supply make sure that data on the rating plate are identical to
the mains data. Connect the plug to an extension cable. It is imperative to sucure the extension cable with
the Cable clamp
8
.
6
8
