Important - Please read these instructions fully before starting assembly
5
Customer Helpline
08456 400 800
Note!
Only supply power to the equipment through circuit protected by an RCD with a maximum trip
current of 30 mA.
•
Use only plugs or connectors approved for outdoor usage.
•
Extension cables must comply to H07RN-F requirements as described in DIN 57 282/VDE 0282 and
must have a minimum cross-section of 1.5 mm
2
. The plug must have an earth and any connection
must also be earthed and splashproof. Before use, check the cables for signs of damage and ageing.
Never use the mower if the cables are not in perfect condition (this also applies to the supply cable on
the mower). If the cable is damaged whilst the mower is working, disconnect the mains plug from the
power supply immediately and then check the extent of the damage.
•
Never allow children or others who are no familiar with the operating instructions to use the lawn
mower. Local regulations may stipulate the minimum age of the user of this type of machinery.
•
In areas where the mains supply is weak or bearing a high load, this mower may cause further voltage
fluctuations as it starts. In extreme cases, this can cause damage to other equipment working from
the same supply. In this case we recommend to temporarily switch off any unneeded equipment or
connect it to a different circuit.
•
This machine is not designed to be used by people (including children) with limited physical, sensory
or mental capacities or those with no experience and/or knowledge unless they are supervised by
a person who is responsible for their safety or they have received instructions from such a person in
how to use the machine safely. Children must always be supervised in order to ensure that they do not
play with the machine.
•
Always check the mower for signs of damage before each usage.
•
Always disconnect the mains lead from the electrical supply before carrying out any inspection,
servicing or maintenance work.
•
Ensure that all the guards are securely fitted and in good working order.
•
Check the grass collector at regular intervals for signs of wear and to ensure that it is always in perfect
working order.
•
Before each use, inspect the mower to check the cutting blade, fastening bolts and the entire cutting
unit for any signs of wear or damage. To prevent imbalance or vibration, worn or damaged cutting
blades and fastening bolts must always be replaced in full.
•
Damaged parts on the mower must be replaced by qualified personnel. Use only genuine spare parts.
•
Repair work on the electrical parts of the lawn mower may only be carried out by a qualified
electrician.
•
Follow the instructions to fit or remove the blade and wear protective gloves.
•
The user remains responsible for any injury to third parties within the working area of the lawn mower
whilst the lawnmower is being used.
•
Only work in good daylight or appropriate and adequate artificial light.
•
Never use the mower when you are tired.
Personal Safety
Safety Information
