Quadro QUADRO4LI Скачать руководство пользователя страница 71

Страница: 71 / 122

Quadro4Li Manual II: Administrator's Guide

Administrator’s Menus

Quadro4Li; (SW Version 5.2.x)

Channel Selection

is used to select between the

Preferred

and

Exclusive

B channel selection methods. For

Preferred

channel selection, the CO

answers to the call request by the first available timeslot. With the

Exclusive

channel selection, the CO should feedback only by the timeslot asked

in the call request.

The

Bearer Establishment Procedure

drop down list allows selecting the session initiation method on the B channel. One of the following options

can be selected for the transmission path completion prior to receipt of a call acceptance indication:

•

on channel negotiation at the destination interface

•

on progress indication with in-band information

•

on call acceptance

The

Calling Party Type of Number

drop down list allows you to select the type identifying the origin of call.

The

Called Party Type of Number

drop down list allows you to select the type identifying the subaddress of the called party of the call.

The

Called Party Numbering Plan

and

Calling Party Numbering Plan

drop down lists correspondingly indicate the numbering plan of the called

party's and calling party's number.

The

Incoming Called Digits Size

text field indicates the number of received digits (in a range from 0 to 255) required to establish a call. When this

field has a “0” value, the system uses either the timeout defined in the T302 field or the

Sending Complete Information element

messages to

establish a call. Independent on the value in this field,

Sending Complete Information element

and the pound sign always result in call

establishment.
The

Generate Progress tone on IP

checkbox selection will generate the progress tone to IP.

When

Generate Progress Tone to PSTN/PBX

checkbox is selected, Quadro generates ring tones to callers during ISDN call dialing. This feature is

mainly applicable to 2-stage dialing mode.

Enable CLIR Service

checkbox selection enables Calling Line Identification Restriction (CLIR) service which displays the incoming caller ID only if

Presentation Indication is allowed on the remote side. Otherwise, if CLIR service is disabled, caller ID will be unconditionally displayed.

When the

Alternative Disconnection Mode

checkbox is not selected, Quadro will disconnect the call as soon as the disconnect message has been

received from the peer. When the checkbox is selected, Quadro’s user may hear a busy tone when peer has been disconnected.

The

Override CLID with P-Asserted-Identity

checkbox selection enables SIP P-Asserted-Identity support. For the calls from SIP to ISDN if Invite

SIP message contains a P-Asserted-Identity, then the CallerID on ISDN is sent with the value from the " P-Asserted-Identity" field, otherwise the
CallerID on ISDN is sent with the value from the "From" field. For the calls from ISDN to SIP if the incoming CallerID from the ISDN network contains
a restricted flag then the "P-Asserted-Identity" field in the Invite SIP message contains the restricted CallerID and the "From" field contains
"anonymous".

The

B1 Channel

and

B2 Channel

checkboxes enables/disables timeslots for voice transfer. Disabling the timeslot will prevent both incoming and

outgoing calls.

Clicking on the

ISDN Stats

link will open the

ISDN Status

page that displays ISDN traffic statistics on the corresponding ISDN trunk. The

ISDN