background image

8

NOTE:
Do not completely tighten these straps yet.

They should be holding the top but not pulled as 

tight as possible. You will do final “tightening” after 

you install the windows.

IMPORTANT: The top deck MUST be centered on the rear of the vehicle for the

windows to fit properly.

NOTICE

Step 7: Installing the Quarter and rear Win-
dows to the top Deck
To ensure the top is centered on the vehicle you 
will be installing the two quarter windows and the 
rear window to the top deck and to each other 
before securing it to the vehicle body.

Pro-Install TIP:

 To make this as easy as possible,

 

you may have to release the front windshield hea-
der (release but not un-hook) and loosen the rear 
corner straps installed in step 4. This will allow 
you to line up all window zippers and attachments. 
The rear corner straps and header will need to be 
re-tightened/clamped before using the top.

Locate the drivers rear quarter window. Line up 
and slide the rear quarter window into the “C” 
Channel as shown

in FIGs 55, 56 & 57. Repeat this on the passenger 
side of the vehicle.
Locate the rear window and line up and slide the 
rear window into the “C” Channel located at the 
top of the rear portion of the top deck (FIGs 58, 
59 & 60).

Once both quarter windows are secured to the top 
deck, line up the driver’s side rear zipper on the 
Quarter window to the zipper on the rear window 
and zip it down a few inches (FIG 61).

Repeat this on the passenger side of the rear 
window. You may have to lift the quarter window 
up to secure this second zipper. Once both side 
zippers are secure, zip the rear window zippers 
down about half way (Fig 62). You will close these 
zippers completely at the end of the install.

FIG 50

FIG 51

FIG 52

FIG 53

FIG 54

FIG 55

FIG 56

Содержание QuadraTop Adventure Top S With Flip Back...















Отзывы: