Important Safety information
Your QuadraTop® Complete Soft Top is
intended to be used with other Quadra-
Top Products to increase the fair weath-
er enjoyment of your off-road capable
vehicle. Before installation,
please take a moment to review the
following safety information and installa-
tion instructions. Important safety infor-
mation is generally preceded by one of
three signal words indicating the relative
risk of injury.
The signal words mean.
a hazardous situation which, if not avoided, could result in death or serious in-
jury. You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.
WARNING
CAUTION
NOTICE
a hazardous situation which, if not avoided, could result in minor or moderate
injury. You CAN be moderately HURT and also may suffer property damage if
you don’t follow instructions.
Careful attention is required to this instruction or operation but does general-
ly not relate to personal injury. Damage to your Quadratec® product or other
property may result if you don’t follow instructions.
Before you begin Installation:
We are excited that you have chosen
the QuadraTop Complete Soft Top. This
high-quality soft top is designed to pro-
vide protection from the elements and a
stylish look on your Jeep®.
For a smooth fit and ease of installation, this top should be installed at tem
-
peratures above 72 degrees. Below this temperature, the fabric may contract an
inch or more making it difficult to install. We highly recommend taking the top
out of the package and letting it sit inside a warm place or direct sunlight for
1-2 hours before you install the top. When warm, this top will install quickly.
NOTICE
2
Put your safety Glasses. Carefully
remove the contents of each box orga-
nizing them as shown in Fig.1 making
sure the passenger side and driver’s
side components are separated.
FIG 1
Passenger Side Door Surround
Driver Side Door Surround
Knobs
4mm Allen Wrench
Step 1: Un-packing & Organizing the Door Surrounds:
Put on safety glasses. Carefully remove all the contents of the large shipping box
onto a table top or onto the grown on top of a soft towel.
Once the components are removed
from the shipping box, locate the front
and rear door surround components and
accessories as shown in FIG1.
When unpacking, carefully check to
make sure all parts are included. If any
part is missing or broken, please call
Quadratec customer service at 800-745-
6037. Please note that it is important
that you become familiar with the instal-
lation process of this top by reading the
following instruction sheet and warnings
thoroughly.
