10
When removing the quarter windows from the Top deck, make
sure the zipper is completely out of the “zipper box” before remov-
ing the window. See fig 66 & 66a
NOTICE
FIG 66
FIG 66a
Step 15: Securing the Side and Rear
Windows to the Vehicle
As shown in fig’s 67 & 68, roll the ver
-
tical plastic strip into the door surround
slot securing it to the door surround.
Next, starting at the driver’s side front,
attach the side belt rail into the vehicle
body by “rolling” the plastic into the
slot (FIG 69 & 70).
Note:
You may have to pull the cor-
ners around towards the front or back
of the vehicle to center the top on the
vehicle. If this is too difficult, release
the front windshield header latches.
Once installed the first time these win
-
dows will easily install. Repeat this on
the passenger side centering the top
over the rear bow.
FIG 67
FIG 68
FIG 69
FIG 70
Step 16: Securing the tailgate bar &
rear window to the vehicle
Take the tailgate bar and orient the
“C“-Channel with the round seal facing
down and slide the “C” Channel onto
the rear window retainer as shown in
FIG 7
1
& 7
2
. After sliding the retainer
all the way through the “C” Channel,
roll the tailgate bar into the mounts
with the outside of the fabric facing to-
wards the rear of the Vehicle (Fig 7
3
)
Once the Tailgate bar in secure, lower
zippers on both sides of the rear cur-
tain and move to the rear driver’s side
corner mounts and “roll” the plastic
into the corner mount as shown in FIG
7
4
.
Repeat this
procedure on the
passenger side.
FIG 7
1
FIG 7
4
FIG 7
3
FIG 7
2
