23
09/20
7058-804C
B. Top Vent Adapter Installation
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
Installing the Top Vent Adapter
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet. Do not put silicone inside of
pipe
(Figure 23.1)
.
2. Slide the top vent adapter onto the rear exhaust
outlet and adjust the assembly to a vertical position
(Figure 23.1)
.
3. Drill 4 holes with #26 drill bit (provided) into the back of
the appliance using the outer shield as a pattern (make
sure the assembly is vertical)
(Figure 23.1)
.
4. Install the 4 mounting screws.
5. Drill 2 holes with #26 drill bit through the rear exhaust
outlet using the 2 holes already in the short horizontal
pipe in the top vent adapter as a guide. Install the 2
screws
(Figure 23.1)
.
6. Install the vent pipe into the top vent adapter.
7. To clean the top vent adapter open the clean-out cover
(Figure 23.1)
.
C. Rear Vent Adapter Installations
1. Put a layer of high temperature silicone on the 3 inch
(76mm) exhaust outlet. Do not put silicone inside of
pipe
(Figure 23.2)
.
2. Slide the adapter onto the rear exhaust outlet and
adjust the assembly to the appropriate position.
3. Install the vent pipe into the adapter.
Silicone Rear
Exhaust Outlet
3 to 6 inch
Offset Adapter
3 to 3 inch
Offset
Adapter
Use holes located on
each side a drilling guide
Clean-Out Cover
Rear Vent
Adapter
(811-0620)
Clean-Out
Cover
Top Vent
Adapter
(TPVNT-6)
Figure 23.2 - Rear Vent Adapter
Figure 23.3 - Rear to Top Vent Adapter (90°)
Figure 23.1
