Quadra-Fire PELLET INSERT CB1200MI-MBK Скачать руководство пользователя | Manualshive

Страница: 6 / 32

background image

6

7014-285A

October 9, 2017

CB1200 Pellet Insert

E. Install Checklist

Appliance Install

Appliance is leveled and connector is secured to appliance.

Hearth extension size/height decided.

Outside air kit installed.

Floor protection requirements have been met.

If appliance is connected to a masonry chimney, it should be cleaned and

inspected by a professional. If installed to a factory built metal chimney, the

chimney must be installed according to the manufacturer’s instructions and

clearances.

Chimney

Chimney installed, locked and secured in place with proper clearance.

Chimney meets recommended height requirements (14-16 feet).

Terminations installed and sealed.

Clearances

Combustible materials not installed in non-combustible areas.

Mantels and wall projections comply with installation manual requirements.
Protective hearth strips and hearth extension installed per manual requirements.

Appliance Setup

All packaging and protective materials removed.

All labels have been removed from the door.

All packaging materials are removed from inside/under the appliance.

Manual bag and all of its contents are removed from inside/under the appliance

and given to the party responsible for use and operation.

ATTENTION INSTALLER:

Follow this Standard Work Checklist

This standard work checklist is to be used by the installer in conjunction with, not instead of, the instructions contained in this installation manual.

Customer: __________________________________________________________________________

Date Installed: __________________________________________________________________________

Lot/Address: __________________________________________________________________________

Location of Appliance:

______________________________________________________________

Installer:

__________________________________________________________________________

Dealer/ Distributor Phone #: ______________________________________________________________

Serial #:

__________________________________________________________________________

Model : __________________________________________________________________________

WARNING! Risk of Fire or Explosion!

Hearth & Home Technologies recommends the following:

• That this checklist remain visible at all times on the appliance until the installation is complete.

Comments:

Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed:

Comments communicated to party responsible by on

(Builder/Gen. Contractor) (Installer) (Date)

YES IF NO, WHY?

«
...
4
5
6
7
8
...
»

Содержание PELLET INSERT CB1200MI-MBK

































Отзывы:

Нет отзывов

Похожие инструкции для PELLET INSERT CB1200MI-MBK

Бренд: Pacific energy Страницы: 36

Бренд: Kinder Страницы: 24

Бренд: Sunjoy Страницы: 12

Бренд: barbas Страницы: 32

Бренд: Dik Geurts Страницы: 96

Бренд: Landmann Страницы: 60

Marquis MCVP42LP

Бренд: Kingsman Fireplaces Страницы: 75

Бренд: Moda flame Страницы: 8

Бренд: Dru Страницы: 24

Бренд: Continental Fireplaces Страницы: 28

Бренд: Chinook Fireplaces Страницы: 19

Menards 198-6257

Бренд: Midwest Страницы: 9

Бренд: superior fires Страницы: 15

Бренд: Superior Fireplaces Страницы: 28

Бренд: Superior Fireplaces Страницы: 20

Бренд: Superior Fireplaces Страницы: 32

Бренд: Superior Fireplaces Страницы: 24

Бренд: Superior Fireplaces Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды