Page 26
7014-188L
September 24, 2015
R
1200-I Pellet Insert
G. Optional Log Set Placement Instructions
CAUTION
Logs are FRAGILE. Use extreme care when handling or
cleaning logs.
NOTE:
Due to the abrasive nature of a pellet appliance fi re, the
logs are not covered under warranty. Any placement vari-
ation other than shown here can cause excessive heat
and shall void the appliance warranty.
1. Place the front log in fi rst as shown in
Figure 26.1
charred area surrounding fi repot.
2. Set the left and right logs onto the front log, placing
the holes in the base of the left and right logs over the
locating pins in the front log. See
Figure 26.2.
Ensure
that the charred ends are facing the fi repot.
LOCATING PINS
Charred Areas in the Back
Top Log
Right
Top Log, Left
Front Log
Figure 26.1
Figure 26.2
Open right side plane to access a 4 screw terminal block
located on the bottom right hand side next to the power
cord inlet. The center 2 screws are for the thermostat
wires. The outer 2 are the mounting screws for the ter-
minal block.
Figure 26.3.
H. Thermostat Installation
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of appli-
ance.
CAUTION
Terminal Block
Center 2 Screws for
Thermostat Wires
Power Outlet
Figure 26.3
Содержание PELLET INSERT CB1200MI-MBK
Страница 52: ...Page 52 7014 188L September 24 2015 R 1200 I Pellet Insert F Warranty Policy ...
Страница 53: ...R September 24 2015 7014 188L Page 53 1200 I Pellet Insert ...
Страница 54: ...Page 54 7014 188L September 24 2015 R 1200 I Pellet Insert ...
Страница 55: ...R September 24 2015 7014 188L Page 55 1200 I Pellet Insert ...
