3
05/22
8106-803B
Model
Outfitter-I
Laboratory
UL LLC
Report No.
MH60687
Type
Solid Fuel Room Appliance/Pellet Fuel
Burning Type
Standard
ASTM E1509 and ULC S627 Room
Appliance Pellet Fuel Burning type and
(UM) 84-HUD,
Mobile Home Approved.
A. Appliance Safety Certification
NOTICE:
This installation must conform with local codes.
In the absence of local codes you must comply with the
ASTM E1509, ULC S627 and (UM) 84-HUD
.
C. BTU & Efficiency Specifications
This pellet appliance needs periodic inspection and repair
for proper operation. Consult the owner’s manual for further
information. It is against federal regulations to operate this
pellet appliance in a manner inconsistent with operating
instructions in this manual.
EPA Certification
Number:
184-19
EPA Certified
Emissions:
0.7 grams per hour
*LHV Tested Efficiency:
79.4%
**HHV Tested Efficiency:
74.6%
***EPA BTU Output:
6,800 - 26,000 per hr
****BTU Input:
9,600 to 33,200 per hr
Vent Size:
3” or 4” Type “L” or “PL”
Hopper Capacity:
60 lbs.
Fuel
Premium Wood Pellets
* Weighted average LHV (Low Heating Value) efficiency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
** Weighted average HHV (High Heating Value) efficiency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
*** A range of BTU outputs calculated using HHV efficiency
and the burn rates from the EPA tests.
**** Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU’s which is the average BTU’s
from a pound of pellets.
The Outfitter-I is Certified to comply with
2020 particulate emission standards.
Model
Outfitter-I
Laboratory
OMNI Test Laboratories, Inc.
Report No.
0061PS095E
Standard
ASTM E2779 and ASTM E2515
Can be found at:
www.quadrafire.com/about-us/epa-certification
B. Appliance Emissions Certification
1
1
Important Safety Information
