March 26, 2020
7039-804B
11
Figure 11.1
Burn Rate
Air Control
Automatic
Combustion
Control (ACC)
High
setting
Low
setting
HIGH
MED
LOW
HIGH
MED
LOW
Figure 11.2
Manual
Timer (ACC)
Shut Down
Pull Forward
to Shut Down
1. Start up and Reloading Fuel
Open both Burn Rate Air Control and ACC systems
fully. To do this with the Burn Rate Air Controls push
spring handle up to high. For the ACC timer system
push knob towards back of appliance until the knob is
located under the high position (
Figure 11.1).
E. Using Burn Rate Air Control & ACC System
Injury Risk.
• Gloves recommended
CAUTION
3. Manual Timer Over-Ride
If you need to shut the ACC system off before it goes
through the cycle of shutting itself off; 25 minutes,
reach towards the back of the appliance on the
right side and pull the lever towards the front of the
appliance (
Figure 11.2).
2. Maximize Heat with The ACC System
To maximize heat output with the ACC timer System
or also known as high burn push the ACC Air Control
lever towards the back of the appliance and leave.
This combined with having the main burn rate control
lever pushed up will deliver the most amount of air
needed to achieve the highest amount of heat output
(
Figure 11.1).
