Quadra-Fire • Adventure-III Installation Manual • 4083-901 • Rev B • 05/15
6
ATTENTION INSTALLER:
Follow this Standard Work Checklist
This standard work checklist is to be used by the installer in conjunction with, not instead of, the instructions contained in this installation manual.
Customer:
Date Installed:
Lot/Address:
Location of Appliance:
Installer
:
Dealer/ Distributor Phone #:
Serial #:
Model (circle one):
Adventure-III
WARNING! Risk of Fire or Explosion!
Appliance Install
Failure to install appliance according to these instructions can lead to a fire or explosion.
Appliance is leveled and chimney connector is secured to appliance.
Outside air kit installed.
Floor protection requirements have been met.
The masonry chimney is inspected by a professional and is clean or the
factory built metal chimney is installed according to the manufacturer’s
instructions and clearances.
Chimney Section 4
Chimney installed, locked and secured in place with proper clearance.
Chimney meets the minimum height requirements.
Terminations installed and sealed.
Clearances Section 3
Combustible materials not installed in non-combustible areas.
Mantels and wall projections comply with installation manual requirements.
Appliance Setup Section 5
All packaging and protective materials removed.
Hearth & Home Technologies recommends the following:
Comments:
Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed:
Comments communicated to party responsible by on
(Builder/Gen. Contractor) (Installer) (Date)
Part # 4083-982• Rev A• 03/11/15
YES IF NO, WHY?
All packaging materials are removed from inside/under the appliance.
Manual bag and all of its contents are removed from inside/under the appliance
and given to the party responsible for use and operation.
That this checklist remain visible at all times on the appliance until the installation is complete.
Section 3
F. Install Checklist
