Quadlogic MiniCloset-5c, Руководство по установке

Страница: 59 / 117

© COPYRIGHT 2009
Quadlogic Controls Corporation
55
C
HAPTER
5
U
SING THE
M
ETER
D
ISPLAY
N
AVIGATION
The following figure shows the MC-5c user interface (LCD window) located on the front panel
of the meter. It is easy to navigate the various sub-menus to read metering data, reset
values and view configuration data.
Figure 5-1. MiniCloset-5 front panel display.
Press and hold the “Display Scroll” button, which is the small square button on the right side
when you are facing the meter. After two seconds, the LCD will display, REVERSE. If you
continue to hold down the Display Scroll button, after another two seconds the LCD will
display FORWARD. These are simply directional indicators that you can use to navigate left
and right through the different menu register headings as shown on below. Each heading will
be displayed in two-second intervals. Note that the MC-5c defaults to the kWh register.
Meter LCD Headings:
Releasing the display scroll button at a given menu heading will allow you to cycle through
the registers listed under the selected menu heading as shown in Figure 5-2, The Display
Menu. For example, if the meter is in FORWARD mode and the Display Scroll button is
released when the LCD reads “Serial # Registers”, each subsequent depression of the
Display Scroll button will show the following, in the order it appears below:
kWH kW Event Diagnostic
Registers Registers Registers
Serial # Phase Diagnostic PLC
Registers Registers Registers