WP2P Digital– User Guide
© 2020 QTech Data Systems Ltd
9
Note
- Ensure that both W2P modules in a pair must be configured to have the same
REPT switch setting.
Radio Address (RA)
All WP2P systems have a unique
Radio Address
which is programmed into WP2P modules during manufacture
as security measure to prevent unauthorised access. The Radio Address is printed on the WP2P case represented
in the following format “192.168.0.0”.
Note -
All WP2P modules in a given system must have the same first three numbers
in their Radio Address. The 4
th
number must be a sequential pair starting from the even
number e.g. 0.1.1.40 & 0.1.1.41.
The Radio Address must be stated for purchasing for WP2P module replacement.
Using Multiple WP2P Systems in the same area
There are ten individual frequency bands referred to as
Channel Numbers
allowing up to ten WP2P systems to
be used in the same area. The Channel Number is identified by the “#” on the packaging label; this example is
“Channel #1”.
Warning – Do not use the same channel for adjacent systems. For example, if you
currently use “#1” ensure that the adjacent system is “#3” etc.
