WP2P Digital– User Guide
© 2020 QTech Data Systems Ltd
6
Switched Inputs
The inputs (Labelled INP1 INp2 and INP3) are electrically isolated, normally open inputs. They are connected to
suitable mechanical switches, contacts and other closure devices. An input is active or ON when the input switch
is closed and inactive or OFF when the input switch is open.
Warning – Only mechanical switches or mechanical closure devices should be
connected to the inputs. No external voltage or other electrical source is to be connected
to the inputs.
WP2P Repeater Module
A WP2P Repeater Module is available to increase the range and coverage of a WP2P system. It is used in
situations where the WP2P modules are a long way apart or there is an obstacle preventing line-of-sight between
them.
The WP2P Repeater Module operates by listening for complete and valid WP2P messages and then re-
transmitting them. It can be used with both WP2P Digital and WP2P Digital & Analogue type modules
simultaneously.
Please refer to the WP2P Repeater User Manual for further details.
