Installation Manual
4. System Debugging
30
www.qtech.ru
After the serial port parameters are set, click
OK
to enter hyper terminal window.
4.2
Power-on Startup
Checking before Power-on
❖
Check if the switch is fully grounded.
❖
Check if the fan module and the power module are correctly installed.
❖
Check if the power cable is correctly connected.
❖
Check if the power supply voltage complies with the requirement of the switch.
❖
Check if the console cable is correctly connected; the terminal (can be a PC) used for
configuration is already started and the parameters are already configured.
Checking After Power-on (Recommended)
After power-on, you are recommended to perform the following checks to ensure the normal
operation of follow-up configurations.
❖
Check if printed information appears on the terminal interface.
❖
Check if the device indicator is normal.
