QTech Q23, Руководство пользователя

Страница: 45 / 50

Q23 Expansion Module Page 45
WARRANTY & LIABILITY
Subject to the under mentioned exemptions
QTech Data Systems Limited
undertakes to repair any manufacturing
defects and replace or repair any faulty materials within (12) twelve months from the date of sale to the original
purchaser.
The exemptions referred to are:
1) Fair wear and tear
2 Faulty installation, misuse, neglect, accident and similar causes.
3) Equipment that does not bear the original Serial Number label or the label has been defaced or altered.
4) Unsuitable operating conditions, including improper installation, and other influences beyond
QTech
control.
5) Alterations carried out by the Purchaser or any unauthorised third party.
7) Power supply protection parts, including fuses and other circuitry provided to protect the unit from electrical
damage.
8) Output drivers, transistors, relays and other parts of the circuitry that are directly connected to third party
equipment.
9) Damage resulting from lightening strikes and other static discharges.
Liability for replacements supplied or repairs carried out is limited to the original (12) twelve month warranty period.
QTech
will not accept responsibility for warranty work carried out by the purchaser or any unauthorised third party.
QTech
does not assume or authorise any person to assume for
QTech
any other liability regarding its products.
QTech
’s liability is limited to the extent set out above and does not extend to any consequential damages or
losses.
DISCLAIMER
In no event shall
QTech
nor it respective agents be liable for special, direct, indirect, or consequential damages
losses, costs, charges, claims, demands, claims for loss of profit, fees, or expenses of any nature or kind.
While
QTech
warrants it’s products it does not imply a warranty for it’s use for a particular purpose.
QTech
shall not be liable for any infringement or violation of copyright with respect to the material reproduced or
displayed on its products. .
WARRANTY SERVICE
Where the conditions of liability as set out above are met
QTech
will carry out warranty service as detailed below:
1) Goods returned for servicing shall be adequately packaged to prevent damage in transit and shall be
forwarded freight pre-paid.
2) A description of the fault/s together with any other relevant information relating to the fault, together with
the return address to which the equipment is to be returned, must be included with any equipment returned
to
QTech
for repair.
3)
QTech
may elect at its sole discretion to repair or replace equipment returned for repair.
4) Where repairs to the equipment are undertaken, the repairs will be undertaken during normal business
hours.
5) Once repairs or replacements are complete, the equipment will be returned by a suitable carrier to the
Purchaser unless otherwise instructed by the Purchaser.