background image

 

3   Introduction

 

 

 

 
 

Introduction 

 
 
 
Ultrasonic Cleaners 
 

This line of ultrasonic cleaners include five models with sizes ranging 
from 1/2 gallons, 3/4 gallons, 1-1/2 gallons, 2-1/2 gallons and 5-1/2 
gallons.  Each model is constructed using durable industrial style 40kHz 
transducers.  These provide increased cleaning power along with built in 
sweep frequency to ensure uniform cleaning activity throughout the bath.  
The 1/2 and 3/4-gallon models have a molded dip in their rims to facilitate 
emptying of solution from the tank.  The three larger sizes have built in 
drains and are supplied with tank drain kits.  Each model can be 
purchased in three different configurations -- with a Mechanical Timer 
(CT), with a Mechanical Timer plus Heat (CHT) and with Digital Control, 
plus Heat and Timer (C). 
 

 

 
 
When you first fill your unit, or refill it with fresh solution, use warm water 
for the solution.  Turn on the heater (press the HEAT switch, if available), 
turn on the ultrasonics (press SONICS or rotate the Timer knob), add the 
cover and the solution will heat quickly to temperature. 

Содержание 50




































Отзывы: