background image

3

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Warranty (USA only; other countries, see your dealer or distributor)

QSC Audio Products 3 Year Limited Warranty

QSC Audio Products, LLC (”QSC”) guarantees its products to be free from defective material and/or workmanship and will replace defective parts 
and repair malfunctioning products under this warranty when the defect occurs under normal installation and use, provided the unit is returned to 
our factory, one of our authorized service stations or an authorized QSC International Distributor via pre-paid transportation with a copy of proof 
of purchase (i.e., sales receipt). This warranty provides that the examination of the return product must indicate, in our judgment, a manufacturing 
defect. This warranty does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the 
date code has been removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal 
rights. This limited warranty is freely transferable during the term of the warranty period. The warranty on QSC products is NOT VALID if the products 
have been purchased from an unauthorized dealer/online e-tailer, or if the original factory serial number has been removed, defaced, or replaced in 
any way. Damage to, or loss of any software or data residing on the product is not covered. When providing repair or replacement service, QSC will 
use reasonable efforts to reinstall the product’s original software configuration and subsequent update releases, but will not provide any recovery or 
transfer of software or data contained on the serviced unit not originally included in the product.

Customers may have additional rights, which vary from state to state or from country to country. In the event that a provision of this limited warranty is 
void, prohibited or superseded by local laws, the remaining provisions shall remain in effect. 

The QSC limited warranty is valid for a period of three (3) years from date of purchase in the United States and many (but not all) 
other countries.

For QSC warranty information in countries other than the United States, contact your authorized QSC international distributor. A list of QSC 
International distributors is available at www.qscaudio.com.

To register your QSC product online, go to www.qscaudio.com and select ”Product Registration”. Other questions regarding this warranty can be 
answered by calling, e-mailing or contacting your authorized QSC distributor.

Phone:

 1-800-854-4079 within US and Canada, +1-714-754-6175 international, 

E-mail:

 [email protected]

Website:

 www.qscaudio.com.

Содержание Q-SYS I/O-22
















Отзывы: