12
TD-001572-01-A
Specifications
Model
MP-A20V
MP-A40V
MP-A80V
Channels
2
4
8
Power (all channels driven)
4 Ω
200 W
200 W
200 W
8 Ω
200 W
200 W
200 W
70 V
200 W
200 W
200 W
100 V
200 W
200 W
200 W
FlexAmp Technology
Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio
Typical distortion (4-8 Ω)
< 0.01%
Maximum distortion (4-8 Ω)
< 1%
Damping factor
100
Output circuitry
Class D
Protection
Short circuit, open circuit, over current, thermal, RF protection, DC fault, inrush limiting
Gain at 8 Ω
30 dB
Input impedance
> 10k, balanced or unbalanced
Input sensitivity
1.23 V (+4 dBu)
Maximum input level
12.3 V (+24 dBu)
Frequency response at 8 Ω
20 Hz – 20 kHz +/- 0.5 dB
Signal to noise
> 103 dB
User-configurable operating modes (per channel)
DIP switch selectable
low impedance 4 Ω or 8 Ω,
high impedance direct drive 70 V or 100 V
High-pass filter
80 Hz DIP switch engaged per channel
Remote Relay
Nominal switching capacity
30 VDC at 1 A for a total of 30 W maximum.
maximum voltage
220 VDC if the current is limited to observe the maximum power rating (30 W).
Cooling
Type
Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow
Operating temperature range
Maximum: -10° - 50° C, recommended: 0° - 35° C, performance may be reduced above 40° C
Connectors
Input connectors
Two 3.5 mm Euro, 3-pin (green)
Four 3.5 mm Euro, 3-pin (green)
Eight 3.5 mm Euro, 3-pin (green)
Remote connectors
One 3.5 mm Euro, 5-pin (black)
One 3.5 mm Euro, 5-pin (black)
One 3.5 mm Euro, 5-pin (black)
Output connectors
One 5.0 mm Euro, 4-pin (green)
Two 5.0 mm Euro, 4-pin (green)
Four 5.0 mm Euro, 4-pin (green)
Front panel indicators
Power, signal (per channel), limit / mute / protect (per channel)
Rear panel indicators
Bi-Color LED signal / limit / mute / protect
Remote I/O
Remote standby, amplifier status indication on one 3.5 mm Euro, 5-pin (black)
AC Power Input
Universal power supply with PFC, 100-240VAC, 50 - 60 Hz
Agency approvals
UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions)
Dimensions (HWD) inches
1.75 in x 19 in x 14.84 in
Dimensions (HWD) mm
44 mm x 483 mm x 377 mm
Net weight
7.7 lb (3.5 kg)
9.3 lb (4.2 kg)
12.8 lb (5.8 kg)
Shipping weight
12.3 lb (5.6 kg)
13.9 lb (6.3 kg)
17.4 lb (7.9 kg)
Specifications are subject to change without notice.
