background image

FEDERAL COMMUNICATIONS COMMISSION (FCC) INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to 
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not 
installed and used in accordance to the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which 
can be determined by switching the equipment off and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.

 THIS PRODUCT IS INTENDED FOR CONNECTION TO A TN OR IT POWER SYSTEM SPECIFICALLY FOR
 NORWAY POWER DISTRIBUTION SYSTEM.

© Copyright  2007 QSC Audio Products, Inc. All rights reserved.

QSC® is a registered trademark of QSC Audio Products, Inc., DCM Manager is a trademark of QSC Audio Products, Inc.

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.

Windows and Windows XP, 2000, and VISTA are trademarks of Microsoft Corporation. 

IBM is a registered trademark of IBM Corporation; Pentium is a registered trademark of Intel Corporation.

 

有毒有害物质或元素 

 (Toxic or hazardous Substances and Elements ) 

部件名称 

 (Part Name) 

铅 

 (Pb) 

汞 

 (Hg) 

镉 

 

(Cd) 

六价铬 

 (Cr(vi)) 

多溴联苯 

 

(PBB) 

多溴二苯醚 

 (PBDE) 

电路板组件

 

(PCB Assemblies)

 

 

       
        X 

  
        O 

  
         O 

        
           O 

             
             O 

             
                 O 

 

机壳装配件

 

 

(Chassis Assemblies)

  

 
        O 

 
        O              

 
        X 

 
           O 

 
             O 

 
                  O 

O

: 表明这些有毒或有害物质在部件使用的同类材料中的含量是在 SJ/T11363_2006极限的要求之下。

 

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.  

X

表明这些有毒或有害物质在部件使用的同类材料中至少有一种而含量是在SJ/T11363_2006极限的要求之上。 

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in 
SJ/T11363-2006.

 

 

Содержание DCM 10

























Отзывы: