Qsan Technology XCubeNXT XN8000D, Руководство по оборудованию

Страница: 44 / 69

40 © Copyright 2020 QSAN Technology, Inc. All Rights Reserved.
4. Click Quick Setup or Custom Setup to start the setup process and follow the onscreen
instructions.
5. If you accidentally leave the quick install page, you can always return to the setup page by go
through the steps above from step 1 again.
6.
After quick setup is finished, login to the QSM as “admin” (default account name) with the
password you set on former instructions.
INFORMATION:
1. The XCubeNXT must be connected to the Internet to install QSM with Web
Finder.
2. Both the XCubeNXT and your PC must be on the same local network.
3. If you cannot find your XCubeNXT, the default IP address for LAN 1 is
169.254.1.234.
4. If you expanded your memory or add a network expansion card earlier on,
you can now check to make sure the system recognizes the new module. You
can check the status by following steps:
a. Login to QSM as admin or a user belongs to the administrator’s
group.
b. Find the memory status in Monitor app

Hardware.
If your system cannot recognize the expanded memory or the network
expansion card or failed to start up, please check again and ensure the unit is
properly installed.