manualshive.com logo in svg

QRS BIOLOG 3000i, Руководство пользователя, Страница: 47 / 47

Поделиться
Скачать
QRS BIOLOG 3000i Скачать руководство пользователя страница 47

APPENDIX     43

 

ELECTROMAGNETIC COMPATIBILITY NOTICE

 

 

This equipment has been tested and found to comply with the limits for a 

class B digital device, pursuant to part 15 of the FCC Rules, 

AS/NZS3200.1.2:1995 and IEC601–1–2:1993. These limits are designed 

to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio 

telecommunications.  In addition, radio frequency transmitters such as 

CB radios and wireless or cellular mobile phones may adversely affect 

this device. 
There is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, or is itself affected by equipment off and on, the 

user is encouraged to try to correct the interference by one or more of 

the following antenna: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the interfering devices. 

• 

Connect the equipment into an outlet on a circuit different from 

that to which the other equipment is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

CAUTION:

 In order to meet 47 CF R 15, IEC601–1–2 and AS NZS3200.1.2, all cables 

used to connect this device to peripherals must be shielded. Operation with unshielded 

cables may result in interference to radio or television reception. 

 

Содержание BIOLOG 3000i
















































Отзывы:

Нет отзывов