SETTING UP THE BIOLOG 3000
i
18
2.5 Set Up Screen 2
Figure 2.9: Set Up Screen 2
2.5.1 Date Format
•
To change the date format from DD:MM:YY (European) to MM:
DD:YY (US), move the cursor by pressing the HOLD key (right
arrow) repeatedly until the symbol (EU) is highlighted.
•
To change the date format to US format (MM:DD:YY), press
briefly the REV key (up arrow). The symbol (US) will appear on
the screen and the date format will change to MM:DD:YY.
The date format is preset DD:MM:YY (European format).
2.5.2 Setting the Date
•
To change the date, move the cursor to the appropriate position
(MM or DD or YY) by pressing the HOLD key (right arrow)
repeatedly.
•
To set the date briefly press the REV key (up arrow).
2.5.3 Enabling Simultaneous Acquisition
The Sim selection
must be enabled
before the BIOLOG 3000
i
can be
used with the 6 or 12 Lead simultaneous cable.
Even if the Sim selection is changed and saved, the ECG in memory will
still be stored. If the BIOLOG 3000
i
is turned OFF during Set Up any
changes to the Set Up will not be saved, however, the current saved
ECG will be preserved.
Содержание BIOLOG 3000i
Страница 12: ...INTRODUCTION 8 1 2 System 3000i Components ...
