Key Log Go rev 2.6 Page 44 of 58
When finished, press the
F12
key again to save the
changes and return to the real-time mode. The
Status LED will go out and you will see the following
message briefly
:
o
If you want to cancel the editing of a macro, press the
ESC
key at any time. The KLG will return to the real-
time receiving mode. The Status LED will go out and
you will see the following message briefly:
Naming Rig Macros
The commands used in rig macros are cryptic, and when you
look at a list of commands in a rig macro, it may not be obvious
what the macro does. To help you remember, KLG allows you
to name each macro. The name will then be shown in the
message summary screen, including the $, so you can
differentiate messages from macros.
To name a macro, simply enter the name as the first characters
followed by a colon “:”. Everything to the left of the colon is the
rig macro name and is not sent to the rig. Everything to the
right of the colon will be sent to the rig as commands. This is
the same as naming text Messages.