Key Log Go rev 2.6 Page 41 of 58
In either mode, to stop transmitting, there are two options:
1. Simply stop typing. The rig will go back into the receive
mode approximately 4 seconds after the last character
was received by the rig. This allows you to take a
breath between words and still stay in the transmit
mode on the rig. Note that this is an Elecraft feature
built into the rig.
2. Hit the ESC key. By hitting the ESC key, the rig will go
back into the receive mode right away. This is useful if
you send by mistake or just want to go back to receive
faster than the built-in 4 second wait in the rig.
Especially useful when contesting.
Note: When sending text from the rig directly, you send CW
with paddles. The rig does the translation from CW to the mode
you are in (PSK31, RTTY, CW). As such, there is no way to
differentiate upper and lower case letters. All letters are sent
using lower case. The KLG uses the same features in the rig,
and the result, as you might have guessed, is the same. All
characters are sent lower case, regardless of whether you
type upper or lower case on the keyboard.
