Key Log Go rev 2.6 Page 38 of 58
Once all 4 lines of the display are filled, the lines will scroll up
and the 4
th
line (bottom) will show the next data received.
While receiving text, the Status LED to the right of the display
will be off, indicating the KLG is in the normal, real-time
receiving mode.
Note: You may find it easier to tune in a specific signal by
placing the rig in the FINE TUNE Mode rather than COARSE
Mode.
Also, the KLG removes extra spaces between characters, so
more useful text is seen on the screen.
Transmitting Text
For Rigs: Elecraft KX3, KX2, K3, K3s
You can send text to the rig by either plugging a PS2 keyboard
into the KLG and simply by typing on the keyboard or Key-
boarding the characters using the KLG keyer. The rig will
transmit the text in whatever mode it is set to. In other words,
if the rig is set to PSK-D, it will send PSK31.
if it is set to FSK-D, it will send RTTY.
If it is set to CW, it will send CW
You just type and the KLG and the rig will take care of the rest.
There are 2 modes offered to send text using the keyboard.
Immediate Mode
– characters are sent to the rig as
they are typed or Key-boarded.
Buffered Mode
–
For KX3, KX2, K3, or K3s Data and
CW Modes only
(CW available in v2.1.3 and later)-