3.2 VFO A
14,027,500
This parameter specifies the VFO A frequency at power-up. The current VFO A frequency during
ordinary operation is not stored in this parameter unless you “Save settings” as described
previously.
3.3 VFO B
14,032,500
This parameter specifies the VFO B frequency at power-up. The current VFO B frequency during
ordinary operation is not stored in this parameter unless you “Save settings” as described
previously.
3.4 Tune rate
100 Hz
This LIST parameter specifies the Tune rate power-up. Available values are: 10MHz, 1MHz,
100kHz, 10kHz, 1kHz, 500Hz, 100Hz, 10Hz or 1Hz. The current Tune rate during ordinary
operation is not stored in this parameter unless you “Save settings” as described previously.
3.5 RIT
+0,000
This parameter specifies the RIT at power-up. The current RIT amount during ordinary operation is
not stored in this parameter unless you “Save settings” as described previously.
3.6 RIT rate
10 Hz
This parameter specifies the RIT tuning rate at power-up. The current RIT tuning rate during
ordinary operation is not stored in this parameter unless you “Save settings” as described
previously.
QCX operating manual, firmware 1.07, manual edit 0.03
16
