• Before installing non-QNAP heatsinks, ensure that they are of the appropriate size and
shape.
1.
Power off the device.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove the case cover.
a.
Loosen the screws.
b.
Slide the cover back.
c.
Lift the cover off the device.
5.
Place the device on its left side.
6.
Install a heatsink on the M.2 SSD.
a.
Locate the controller on the M.2 SSD.
Note
The controller location varies depending on the model and manufacturer of the M.2 SSD.
For details, refer to the documentation or contact the manufacturer.
b.
Remove the protective film from the heatsink.
TVS-675 User Guide
Hardware Installation
20
