QNAP Turbo NAS TS-219P Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 49

QNAP Turbo NAS TS-219P Скачать руководство пользователя страница 14

14

8.

Firmware Recovery Guide for ARM-based NAS Models

Applied QNAP NAS models: TS-110, TS-112, TS-119, TS-210, TS-212, TS-219, TS-219P,
TS-410, TS-410U, TS-412, TS-412U, TS-419P, TS-419U, TS-419U+, TS-119P+, TS-219P+,
and TS-419P+.

This firmware recovery guide is intended for users who encounter system startup failure
due to incomplete or unsuccessful firmware update caused by power outage or network
disconnection during the process. To verify that this guide applies to your NAS, follow the
steps below:
1.

Power off the NAS.

2.

Remove all the hard drives.

3.

Power on the NAS.

4.

Wait for ten seconds and check if you hear a short beep.

5.

After the short beep, wait for two minutes to check if you hear a long beep.

6.

If you only hear a short beep or do not hear any beep, follow the instructions of this
guide to recover your NAS.

Follow the steps below to recover the NAS.
1.

Download the live CD ISO image from the following links:
a.

TS-110, TS-119, TS-210, TS-219, TS-219P

http://us1.qnap.com/Storage/tsd/Flash_Reburn_live-cd-2009-09-24(TS-110&119&
210&219&219P).iso

b.

1-bay, 2-bay, or 4-bay NAS models

http://us1.qnap.com/Storage/tsd/Flash_Reburn_live-cd-2009-12-09(TS-410&410U
&419P&419U).iso

c.

TS-119P+, TS-219P+, or TS-419P+

http://us1.qnap.com/Storage/tsd/live-cd-2010-10-08.(TS-x19P+_Recovery).iso

d.

TS-112/212/412/412U/419U/419U+

http://us1.qnap.com/Storage/tsd/live-cd-2011-03-02(TS-x12_412U_41)
.iso

«
...
12
13
14
15
16
...
»

Содержание Turbo NAS TS-219P


















































Отзывы:

Нет отзывов