QNAP TS-1253BU Скачать руководство пользователя

Страница: 41 / 56

LED

Status

Description

Status

Flashes green and red
alternately 2 times per
second

• A drive on the NAS is being formatted.

• The NAS is being initialized.

• The operating system is being updated.

• RAID rebuild is in process.

• Online RAID Capacity Expansion is in process.

• Online RAID Level Migration is in process.

Green

The NAS is ready.

Flashes green 2 times per
second

• The NAS is not configured.

• A drive on the NAS is not formatted.

Red

• The drive is invalid.

• A disk volume has reached its full capacity.

• A disk volume is about to reach its full capacity.

• The system fan is not functioning.

• An error occurred when accessing (read/write) the

data.

• A bad sector is detected on a drive.

• The NAS is in degraded read-only mode (two member

drives failed in RAID 5 or RAID 6 but the data can still
be read).

• Hardware self-test error.

Flashes Red 2 times per
second

The NAS is in degraded mode (one member drive failed in
RAID 1, RAID 5, or RAID 6).

Flashes Red once

The NAS has received a command from a remote control.

Flashes Amber

The NAS is in sleep mode (S3).

Off

All drives are in standby mode.

Gigabit LAN
(Front)

Amber

The NAS is connected to a network.

Flashes Amber

The NAS is being accessed from the network.

Off

The NAS is not connected to a network.

Gigabit LAN
(Rear)

Left Green

The Ethernet port is connected to a 1 gigabit network.

Left Amber

The Ethernet port is connect to a 100 megabit network.

Left Off

The NAS is not connected to a network.

Right Green

The Ethernet port is connected to a network.

Right flashes Green

The NAS is being accessed on this Ethernet port.

Right Off

The Ethernet port is not connected to a network.

TS-x53BU User Guide

Basic Operations

Содержание TS-1253BU

























































Результаты поиска

Содержание TS-1253BU

Отзывы:

Похожие инструкции для TS-1253BU

Бренды по названию

Популярные бренды

QNAP TS-1253BU, Руководство пользователя

Результаты поиска

Содержание TS-1253BU

Отзывы:

Похожие инструкции для TS-1253BU

Бренды по названию

Популярные бренды