Warning
• Do not touch the internal components, particularly the metal connectors.
• Do not bend the module.
7.
Install a new module.
a.
Align the notch with the ridge in the slot.
b.
Insert the module into the slot.
c.
Verify that the metal connectors are completely inserted into the slot.
d.
Carefully press down on the module until the retention clips lock the module into place.
8.
Attach the fan module.
a.
Align the protruding part of the module with the hole on the chassis below the M.2 SSD slot.
b.
Push the module toward the system board until the clip locks the module into place.
c.
Attach the screws.
TS-hx86 User Guide
Installation and Configuration
38
