QMS VMS, Руководство пользователя программного обеспечения

Страница: 64 / 118

QMS VMS-
Supported
Parameters
VMS Interface for QMS Crown Printers 4-12
DOC
Some QMS printers don’t support QMS Document Option Com-
mands (DOC). The symbiont generates DOCs to access most printer
features. Refer to your printer user's guide to determine if your printer
supports DOC. You may force the omission of DOCs that are gener-
ated by the symbiont by entering the following command:
$ PRINT/PARAMETER=DOC=OFF/QUEUE= queue_name -
_$filename
Specifying DOC=ON has the same effect as omitting this command.
INPUT
Include the INPUT parameter in your generic queue definition to
specify the input tray, cassette, or bin to use for jobs sent to the
queue. The arguments for INPUT are product dependent, and you
should refer to your product’s on-line help for valid values. Refer to the
printer user’s guide for a complete list and location of the input trays,
cassettes, and bins.
The following example specifies the tray, cassette, or bin identified as
TOP:
/PARAMETER=INPUT=TOP
If a generic queue includes this parameter and a print job sent to the
queue doesn’t specify an input tray or bin with the PRINT command,
the printer draws paper from the top tray or bin when printing the job.
If a generic queue doesn’t include this parameter, you may specify
INPUT at the command line as follows:
$ PRINT/PARAMETERS=(INPUT= selection )
» Note: If you are not sure of the contents of the input bins, use the
SHEET_SIZE parameter.
MESSAGES
Include the MESSAGES parameter in your generic queue definition to
obtain printer backchannel messages that occur during the process-
ing and printing of the job.