QMS Magicolor 6100, Руководство по эксплуатации

Страница: 160 / 224

"&
.
$)
REPLACE FUSER
The fuser needs replacing. Have printer serviced.
Contact your local
vendor or see
appendix A, “QMS
Customer Support,”
for a listing of support
sources.
REPLACE FUSER CLEANER
The fuser cleaning roller
needs replacing. Replace fuser
cleaning roller.
RESETTING ACCOUNTING
The reset accounting
operation is in process. No action needed.
TEST PRINT
A test print page is printing. No action needed.
TOP DOOR OPEN
The top cover of the printer is
not fully closed. Ensure the top cover
is fully closed.
TR UNIT MISINSTALLED
The transfer unit is not
installed incorrectly. Check the transfer unit
installation.
TRANSPORT JAM
Media has jammed while
passing through the engine. Locate and remove
the jam.
WAITING FOR IDLE
An active job is in process.
Access to the menu is not
allowed until the job is
finished. Wait until the print job
is finished and the
printer goes idle.
WAITING ON INPUT
END JOB?
The compiler is waiting on
incoming data for the first job
in the queue. The job may not
have an end-of-job indicator
and therefore cannot end.
The message clears if more
input arrives from the port or
if you press the Cancel key.
No other jobs can be printed
until this job has ended. Wait until the job is
finished and the
printer goes idle to
access the
configuration menu.
This status message... means... Do this...