QMS Magicolor 6100, Руководство по эксплуатации

Страница: 165 / 224

"
+"!*
$9
"
To test communication between your printer and your PC, first create a short file that
ejects a page from the printer. Then send the file to the printer.
(*
To create the test file, type the following commands at the DOS prompt:
copy con printest.ps
↵
showpage
↵
^D^Z
↵
(All commands above except the DOS copy command are case sensitive and must
be typed exactly as shown.) Showpage is a PostScript command that prints a blank
page. The
↵
symbol means to press the Enter key. To produce the ^D and ^Z, press
and hold down the Ctrl key while you type the appropriate letters (d and z). These
characters signify the end of the file and must always be included.
(*
% "
First you need to check and make sure the printer is on and connected to your net-
work by pinging the printer.
1 If you have a PC:
a Go to Start/Programs/MS-DOS Prompt (Start/Programs/Command Prompt
for NT).
b In the DOS window, type:
ping ipaddress
↵
(for example, ping 161.33.128.5
↵
)