QMS 2425, Справочник

Страница: 72 / 244

0HGLD,QSXW
406785%23ULQW6\VWHP5HIHUHQFH
6HWWLQJXS&KDLQLQJ2SWLRQ
An option in the Operator Control menu allows you to configure
whether or not an inputbin will be available for chaining to or from
another inputbin.
1DPLQJ0HGLD,QSXWELQV
Options in the Administration/Engine menu allow you to give each
inputbin a more descriptive name. These names are displayed in the
printer message window, where appropriate. You can also use the
descriptive names with DOC commands. (See the
QMS Crown Docu-
ment Option Commands manual for complete information on Docu-
ment Option Commands.)
Menu Operator Control/Chain Options
Choices
Chain Lower
Off—Do not allow media to be pulled from the lower
cassette.
On—Allow media to be pulled from the lower
cassette if necessary.
Chain Multipurpose
Off—Do not allow media to be pulled from the
multipurpose tray.
On—Allow media to be pulled from them
multipurpose tray if necessary.
Chain Optional
Off—Do not allow media to be pulled from the
optional paper deck.
On—Allow media to be pulled from the optional
paper deck if necessary.
Chain Upper
Off—Do not allow media to be pulled from the upper
cassette.
On—Allow media to be pulled from the upper
cassette if necessary.
Default
On
Notes The Operator Control/Chain Inputbins menu must be
set to On before the settings in this menu take effect.