QMS 2060, Операция

Страница: 89 / 158

Media Jams
6-19 Troubleshooting Printer Problems
4 Is the printer printing codes or not printing at all when in
ESP mode?
n
Reconfigure the port to the specific printer emulation of
the file you are trying to print. See chapter 4, “Printer
Configuration,” in the
Reference guide for instructions.
n
If a PostScript file prints PostScript emulation statements
while in ESP mode, increase the ESP timeout. See chap-
ter 4, “Printer Configuration,” in your
Reference guide.
n
If you continue to have problems with the ESP mode
selecting the appropriate printer emulation, contact your
QMS vendor.
Media Jams
Automatic Jam Recovery
With most printers, if a jam occurs, you must remove the jammed
media and then reprint the job. However, the QMS 2060 Print System
provides automatic jam recovery (when enabled through the Adminis-
tration/Engine/Page Recovery menu). If a media jam occurs, remove
the jammed media, and printing automatically resumes from the page
the printer stopped at when the jam occurred.
» Note:
For automatic jam recovery to work, it is necessary to leave the
printer turned on while you remove the jammed media. After the jam
is cleared, open and close the top door before printing. Printing will
not resume until you do this.
Locating Print Media Jams
When print media jams occur, a
PAPER JAM
message displays in the
message window. Frequent jams in any area indicate that area should be
checked, repaired, or cleaned. Repeated jams may also happen if you
are using the wrong weight print media. (See appendix B, “Technical
Specifications,” in the
Reference guide for print media specifications.)