QMS 1660E, Начало работы

Страница: 73 / 114

Configuring the
Network
4-19 Connecting to an Ethernet Network
9 Select Yes and press Enter to save your changes and exit
from PCONSOLE.
TCP/IP
1 Log on the UNIX system as root.
2 Edit the system host table by adding the following line to the
/etc/hosts file:
internetaddress hostname
where internetaddress is the Internet address of the printer
(Administration/Communications/Network 2/CrownNet/
TCPIP/Internet Address menu) and
hostname is the name of
the host.
3 If necessary, set the hardware address.
▲
Caution: We strongly recommend that you do not change the
hardware address.
If you’re working on a system other than a UNIX system, set
the hardware address through the printer control panel.
If you’re working on a UNIX system, send the hardware
address to the print server by typing
arp -s hostname hardwareaddress temp
↵
ping hostname
↵
where hostname is the name of the host and
hardwareaddress
is the hardware address of the printer (in
the form ## . ## . ## . ## as found on the printer start-up page
and in the Administration/Communications/Network 2/
CrownNet/Common/HW Address menu).
» Note: You can also send the hardware address of a UNIX system
through the BOOTP and RARP utilities.