QMS 1660E, Начало работы

Страница: 59 / 114

Installing the
Software
4-5 Connecting to an Ethernet Network
▲
Caution:
We recommend that you make backup copies of the
appropriate disks. Store them in a safe place; use the copies to install
the software.
DOS
1 With the PC on, insert the CrownAdmin software for DOS
disk in the disk drive.
2 At the DOS C> prompt, type
x :install source destination
↵
where x is the drive in which you inserted the disk, source is
the pathname of the drive/directory containing the
installation software, and
destination
is the full pathname of
the directory in which the software will be installed (for
example,
a:install a: c:\crownadm
↵
).
» Note: You can’t install the utilities by copying files from the disks.
You must run the installation program.
3 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
4 Go to the next section, “Configuring the Interface.”
Macintosh System
1 With the Macintosh on, insert the CrownAdmin for Macin-
tosh disk in the disk drive.
2 If necessary, double-click the Utilities disk icon to open a
disk window.
3 Copy the CrownAdmin file by dragging the CrownAdmin
icon from the Utilities window to the Macintosh hard disk.
4 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
5 Go to the next section, “Configuring the Interface.”