QMI 1000, Руководство пользователя

Страница: 7 / 36

QMI 1000
manual Page 7
1. BATTERIES
Battery Type
This analyser has been designed for use with disposable alkaline batteries or
rechargeable Nickel Metal Hydride (NiMH) batteries. No other battery types
are recommended.
WARNING
The battery charger unit must only be used when NiMH batteries are fitted.
Replacing Batteries
Turn over the analyser, remove its’ protective rubber sleeve and fit 4 “AA”
batteries in the battery compartment.
Take great care to ensure they are fitted
with the correct battery polarity. Replace the battery cover and protective
rubber sleeve.
Switch the analyser on and check that the analyser’s time and date are correct.
To reset see
USING THE MENU, Section 5.
Charging NiMH Batteries
Ensure that you use the correct charger.
To fully charge NiMH batteries:
Switch the
QMI 1000
on.
The charger must then be connected and switched on.
When charging, the red Battery Charging Indicator will illuminate.
Now switch the
QMI 1000
off. The display will show “BATTERY
CHARGING”
The first charge should be for 12 hours continuously. NiMH batteries are
suitable for top up charging at any time, even for short periods.
An in-vehicle charger can be used to top up the analyser's batteries from a 12
volt vehicle battery.
Battery Disposal
Always dispose of depleted batteries using approved disposal methods that
protect the environment