Qlogic SANsurfer FC HBA Manager Application, Руководство пользователя, Страница: 25 / 218

FS0054603-00 C 4-1
Section 4
System Requirements
The SANsurfer FC HBA Manager application requires the hardware and software
listed in this section for optimum performance.
4.1
Hardware Requirements
The minimum hardware requirements are as follows:
■
QLogic QLA200/QLA2 xxx PCI to Fibre Channel HBAs (see section 4.3)
■
Single-processor or multiprocessor server or workstation:
❑
Pentium III with 450 MHz or greater for Windows 2000, Windows
Server 2003, Red Hat/SuSE Linux, and NetWare
❑
Sun Ultra 60 for Solaris SPARC
■
Fibre Channel devices, such as disks and RAID subsystems
NOTE: Tape devices display as part of the configuration, but are not supported
by SANsurfer FC HBA Manager (no support for LUN masking or
diagnostics).
■
128 MB of physical RAM are required to run SANsurfer FC HBA Manager;
256 MB are recommended. Running with less memory can cause disk swapping,
which severely effects performance.
■
Video card capable of 256 colors and a screen resolution of 800
×
600 pixels are
required; 16K colors and 1024
×
768 pixels are recommended.
■
About 100 MB of disk space