Qlogic SANsurfer FC HBA Manager Application, Руководство пользователя, Страница: 144 / 218

9 – Displaying Host, HBA, HBA Port, Device, and LUN Information
Displaying HBA Port Information
9-10 FS0054603-00 C
Q
9.3.3.2.2
Updating HBA Port Statistics Automatically
Perform the following steps to set the system to update HBA port statistics
automatically:
1. Select the Auto Poll check box.
2. Click Set Rate . The Statistics Sampling Rate dialog box displays (see
figure 9-7) .
Figure 9-7. Statistics Sampling Rate Dialog Box
3. In the Sampling Rate box, type the sampling rate interval. The range is 5 to
30 seconds. The default is 5 seconds.
NOTE: The faster the polling rate, the more quickly the SANsurfer FC HBA
Manager GUI receives indications from the host. However, faster
polling rates consume more of your system’s CPU and network
resources and slow the system.
4. Click OK to set the interval. Click Cancel to not set the interval.
9.3.3.2.3
Resetting HBA Port Statistics
Click Reset to reset the statistics to their initial value of zero.