3–Fibre Channel Configuration
Configuring and Verifying FA-BLD
70
BK3254601-00 C
shows an example.
Figure 3-24. Enabling Fabric-Assigned Boot LUN
Configuring the Adapter and Boot Devices with QConvergeConsole CLI
To configure adapter and boot devices:
1.
In QConvergeConsole CLI, navigate to Adapter Configuration and then
select
HBA Parameters
.
2.
Enter the port number.
3.
Select
Configure HBA Parameters
.
4.
Select
Enable BIOS
and set it to
Enable
.
5.
In the Adapter Configuration, select
Boot Device Configuration
.
6.
Enter the port number.
7.
Select
Configure Boot Device(s)
.
8.
Set the
Enable Fabric Assign Boot LUN
to
Enable
.
9.
Select
Commit Changes
.
