3–Fibre Channel Configuration
Configuring the UEFI Driver
56
BK3254601-00 C
Configuring OoOFR with Noninteractive QConvergeConsole
CLI
To enable OoOFR in the noninteractive mode of QConvergeConsole CLI, issue
one of the following commands:
#
qaucli -n <hba instance>|<hba wwpn> EnableReceiveOutOfOrderFrame 1
#
qaucli -n <hba instance>|<hba wwpn> EO 1
Where:
To disable OoOFR in the noninteractive mode of QConvergeConsole CLI, issue
one of the following commands:
#
qaucli -n <hba instance>|<hba wwpn> EnableReceiveOutOfOrderFrame 0
#
qaucli -n <hba instance>|<hba wwpn> EO 0
Configuring the UEFI Driver
This section provides information on configuring the unified extensible firmware
interface (UEFI) driver contained in the multiboot image. UEFI 2.
x
systems use a
human interface infrastructure (HII) to configure motherboard devices and plug-in
adapters. QLogic Fibre Channel Adapters use an HII to configure adapter
parameters and boot-from-SAN settings.
To configure the UEFI driver for Dell:
1.
During system boot, press the key corresponding to your platform.
2.
On the Dell System Setup window, select
Device Settings
, and then press
the ENTER key.
hba instance
= Adapter number (use the
-g
command to find)
hba wwpn
= Worldwide port name of the adapter
