Qlogic QLE2740L-DEL, Руководство пользователя

Страница: 104 / 135

3–Fibre Channel Configuration
Configuring End-to-End CS_CTL QoS
89 BK3254601-00 C
6. Set the vPort priority as follows:
If the vPort is listed under QoS :
a. Select the vPort.
b. Set the QoS priority value for the vPort by moving the corresponding
slider.
c. Click Save .
Figure 3-39 shows an example.
Figure 3-39. Changing vPort Priority Using QConvergeConsole Plug-ins
If vPort is not listed under QoS :
a. Under QoS , click Add .
b. Set the QoS priority value by moving the corresponding slider.
c. Enter the vPort WWPN.
d. Click Save .
7. Click Refresh to see the new QoS settings.
To remove a vPort priority:
1. Under QoS , locate the vPort whose priority you want to remove.
2. Do one of the following:
 Select the Delete check box of the vPort you want to remove.
 Select the Delete check box in the header to select or clear all of the
vPorts.
3. Click Save .