Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя, Страница: 42 / 366

4–NIC Noninteractive Commands
-d
4-4 SN0054667-00 C
For example:
> qaucli -pr nic -ch 1
=== Displaying CNA config info for 1. CNA Port Index ===
CNA_Alias : CNA X54
-d
To generate XML discovery output, issue the
-d
command as follows:
> qaucli -pr nic -d <flash_file> [ xml_output_file ]
where
flash_file
is the Flash file and
xml_output_file
is the XML
discovery output. If you omit
xml_output_file
, XML discovery output is written
to
stdout.xml
.
-ei
To get error and exit code information for noninteractive mode, issue the
-ei
command as follows:
> qaucli -pr nic -ei
-extloopback
To configure external loopback test parameters before you run the test, issue the
-extloopback
command as follows:
> qaucli -pr nic -extloopback < cna_port_inst > < tests_num >
< on_error >
Where
tests_num
specifies the number of tests to run (a value between 1 and
65,535) and
on_error
specifies the action to take if an error is encountered in
the test (
0
= ignore the error;
1
= abort the test).
To determine
cna_port_inst
, run the following command:
>
qaucli -nic -i
-flashsupport
This command lets you use the Flash Support Tool to manage the Flash memory.
To use the Flash Support Tool, issue the
-flashsupport
command as follows:
> qaucli -pr nic -flashsupport [< option >]
Where
< option >
is one of the following options: