Qlogic QConvergeConsole CLI 2400 Series, Руководство пользователя

Страница: 115 / 366

6–iSCSI Noninteractive Commands
-dtrem (Remove Discovered Target)
SN0054667-00 C 6-9
-dtrem
(Remove Discovered Target)
To remove a nonpersistent discovered target, issue the
-dtrem
command as
follows:
-dtrem < hba_port_inst > < target_instance >
To obtain the target instance, use the command “-dtdsp (Display Discovered
Targets)” on page 6-7 .
-dtrema
(Remove Discovered Target)
To remove all nonpersistent discovered targets, issue the
-dtrema
command as
follows:
-dtrema < hba_port_inst >
-dumpcore
(Retrieve FW Coredump Record)
To dump the RAM memory to a file name of your choice, issue the
-dumpcore
command as follows:
-dumpcore < hba_port_inst > < file name >
-dumpnvram
(Retrieve FW Flash & NVRAM Record)
To dump the NVRAM to a file name of your choice, issue the
-dumpnvram
command as follows:
-dumpnvram < hba_port_inst > < file name >
-dv
To see the version of the iSCSI adapter driver(s) installed, issue the
-dv
command as follows.
-dv
-edchap
(Edit a CHAP Entry)
To change the value of the specified CHAP entry, issue the
-edchap
command
as follows:
-edchap < hba_port_inst> <CHAP> < Parameter > | < Parameter Alias >
< Value > [< Parameter > | < Parameter Alias > < Value > …]
You can repeat the
< Parameter >|< Parameter Alias > < Value >
parameter
pair to change multiple values as shown in Table 6-2 . Press ENTER after each
entry.