Qlogic iSR6200, Руководство пользователя программного обеспечения

Страница: 183 / 210

A–Configuring the Data Path Through iSR6200 for Online Data Migration
Solaris Multipath Configuration
ISR654608-00 B A-11
Removing second direct path
from controller port (for exam-
ple, Port B) 1. Zone out the second direct path from the Fibre Channel switch.
2. To rescan the paths, issue the
devfsadm
command and verify
that the disabled path is no longer available.
3. To check the number of paths now available, issue the
mpathadm list lu
command.
4. To check the state of the path, issue the
luxadm -v display
< multipath device >
command and ensure that the path in
in an offline state.
Adding router path for the
removed controller port.(for
example, Port B) 1. Add the second router path by zoning the targetmap and host
ports.
2. To perform a rescan, run the
devfsadm
command.
3. To check if the new path is configured, issue the
cfgadm -al
command.
4. To rescan the paths, issue the
devfsadm
command and verify
that the newly-added path is now available.
5. To check the number of paths now available, issue the
mpathadm list lu
command.
6. To check the state of the new path, issue the
luxadm -v dis-
play < multipath device >
command and ensure that the
path is in an online state.
Table A-9. Configuring Native Multipathing on Solaris SPARC (Continued)