Qlogic iSR6200, Руководство пользователя программного обеспечения

Страница: 101 / 210

6–Command Line Interface
migration add
ISR654608-00 B 6-27
----- ----------- ----------
0 1 Group 0
Please select a Group that this Job should belong to [0]
Start Time (1=Now, 2=Delayed, 3=JobSerialScheduling, 4=ConfigureOnly) [ Now ]
Successfully created Job
All attribute values for that have been changed will now be saved.
To schedule an individual data migration job in the CLI:
1. Log in to the iSR6200 as guest and enter the password.
2. Open a miguser session using the following command:
miguser start -p migration
(The default password for miguser is migration .)
3. To create a migration job, enter the following command:
migration add
4. When the CLI prompts you to select a migration type, type either
1
to select
Online or type
2
to select Offline.
5. Every migration job is defined by a Source LUN and a Destination LUN. The
CLI lists the source arrays that you have previously defined and prompts you
to select one.
6. When prompted, select a VP Group for the Source LUN.
7. From the selected source array, the CLI lists the LUNs that have been
exposed to the iSR6200 for migration, and prompts you to select one LUN.
The CLI lists the destination arrays that you have previously defined.
8. When prompted, select a VP Group for the Destination LUN.
From the selected destination array, the CLI lists the LUNs that have been
exposed to the iSR6200 for migration.
9. Select one LUN. The destination LUN you select should not be a part of any
other job, and its size should be equal to or greater than the source LUN.
The iSR6200 warns you if it detects any valid metadata on the destination
LUN. However, you can continue and use the LUN for migration if you are
aware of the consequences and want to continue with the job scheduling.
10. At the prompts, specify the I/O size, job name, migration group, and
scheduling type.